For cutting stone at customers site.

This machine consists of a portal frame and a double bridge, each fitted with a cutting head. The whole machine is fixed to a trailer so that stability and mobility both are guaranteed.

• Sawing table 1.700 x 2.100 mm (WxL)
• Two tilting tables, both to displace from 0-50°, manuel
• Width tilting table 50 mm
• Length machine approx. 3.500 mm
• Saw length 2.000 mm
• Sawing speed approx 40m/ sec with a blade of 600 mm
• Saw motor 8 kW
  

• Saw Diameter 350 to 600 mm
• Cutting depth 185 mm (600 bar)
• Cutting range 3500 x 1800 mm
• Bridge Length 3.5 m
• Height adjustment not
• Turntable 3000 x 1800 mm, max loading weight 1750 kg
• Peripheral speed can be adjusted using inverters
• PLC, to set cutting width, number of cutting strips, cutting waste

• Saw Diameter 600 to 900 mm
• Cutting depth 315 mm (900 bar)
• Adjustable rotation speed can be adjusted using inverters
• Cutting range 3500 x 1800 mm
• Bridge Length 3.5 m
• Automatic height adjustment 450 mm
• Turntable 3000 x 1800 mm, max loading weight 5000 kg
• By PLC to set: width of cut, cutting some strips, cutting waste

Optional:

• Electric saw head which can turn 90 degrees horizontally
• Profiling due table scan, coordinates are send translated to machine

• Saw Diameter 900 - 1200 mm
• Cutting depth 400 mm (1200 bar)
• Peripheral speed can be adjusted using inverters
• Cutting range 3500 x 3500 mm
• Bridge Length 5 m
• Automatic height adjustment 500 mm
• Turntable 3000 x 1500 mm, max loading weight 5000 kg
• PLC to set: width of cut, cutting some strips, cutting waste

Optional:

• Electric saw head which can turn 90 degrees horizontally
• Profiling due table scan, coordinates are send translated to machine

• Saw Diameter 1200 - 1600 mm
• Cutting Depth 600 mm (1600 bar)
• Peripheral speed can be adjusted using inverters
• Cutting range 3500 x 3500 mm
• Bridge Length 5 m
• Automatic height adjustment 1200 mm
• Turntable 3000 x 1500 mm, max loading weight 5000 kg
• PLC to set: width of cut, cutting some strips, cutting waste

Optional:

• Electric saw head which can turn 90 degrees horizontally
• Profiling due table scan, coordinates are send translated to machine

• Saw Diameter 1600 - 2000 mm
• Cutting depth 800 mm (2000 bar)
• Peripheral speed can be adjusted using inverters
• Cutting range 3500 x 3500 mm
• Bridge Length 10 m
• Automatic height adjustment 1200 mm
• Turntable 3000 x 1500 mm, max loading weight 8000 kg
• PLC to set: width of cut, cutting some strips, cutting waste

The Alpha Bridge Saw is suited for the cutting of sandstone, limestone, marble and granite.

• Saw Diameter 400 - 1600 mm
• Cutting Depth 115 to 625 mm
• Peripheral speed can be adjusted using inverters
• Cutting range 3500 x 3500 mm
• Bridge Length 5 m
• Automatic height adjustment 300 to 700 mm
• Turntable 3000 x 1500 mm, max loading weight kg 1750-10000
• PLC to set: width of cut, cutting some strips, cutting waste

Bridge saw Gamma suited for processing sandstone, limestone, marble and granite.

• Saw diameter 400 – 800 mm
• Sawing depth 90 - 265 mm
• Peripherical speed steplessly regulated by frequency regulator
• Sawing reach 3500 x 3500 mm
• Bridge length 4.5 mtr
• Rise and fall none up to 450 mm by means of short circuited motor
• Turntable 3500 x 1800 mm, max load 1.750 kg

Programmation:
For fully automatic sawing, PLC with operator panel which is suited for adjusting;

• One strip width
• The number of strips
• The loss due to sawing

The saw head can be rotated in vertical plane (mitre) 0, 45 and 90 degrees and in horizontal plane 90 degrees.

There is also a possibility for profiling; with the use of a scan table a drawing is scanned. The profile of the drawing will automatically be transferred to the machine. 

Bridge saw Sigma is suited for processing sandstone, limestone, marble and granite. The CNC version has the possibility for profiling; linear, convex and concave.

• Saw diameter 600 - 1600 mm
• Sawing depth 200 - 625 mm
• Peripherical speed: steplessly regulated by frequency regulator
• Sawing reach 3500 x 3500 mm
• Bridge length 5.5 – 6.0 mtr
• Rise and fall 500 up to 700 mm by means of short circuited motor
• Mitre: 0 to 45 degrees, electrical driven
• Turntable 3500 x 1800 mm, max load 5000 – 10.000 kg

Programmation:
For fully automatic sawing, PLC with operator panel which is suited for adjusting;

• One strip width
• The number of strips
• The loss due to sawing

CNC control consisting of:

• Drawing table 1.5 x 1.0 mtr complete with foot, drawing machine and digitizer
• CNC hardware, switched ‘on-line’ for 3 axes servo control