Maveco has developed and builed a brand new Monolame to coop with the demand of higher blocksize and capicity.
The Monolame is suitable for cutting various kinds of natural stones like sandstone, limestone and marble.

A block is placed on a sawing car and after this the Monolame cuts the stones in the desired formats.



Technical specifications of this Monolame:

Cutting range     4.000 x 2.800 mm (L x H)
Sawing stroke    1.000 mm
Main motor        22 kW
Sawing car         3.000 x 3.500 mm (L x B)

Diamond wire saw for sawing square blocks of natural stone and for sawing blocks into slab of any thickness

• Number of wires 1
• Sawing reach 4000 x 2300 mm
• Sawing height 2100 mm
• Stationary bridge
• Saw table (car) 2300 x 2300 x 670 mm
• 30 tons load capacity
• CNC control/ profiling is optional

Circular saw for sawing square blocks out of sand stone, lime stone, marble en granite. With this machine you are able to produce automatically without operator, this way you can produce very efficient.

Maveco has got two types of the Apollo, which have a different blade diameter and saw depth.

Apollo 4

• Blade diameter 725 1000 1200 mm
• Saw depth 260 365 440 mm

Apollo 6

• Blade diameter 2000 2500 2700 3000 3500 mm
• Saw depth 800 1050 1150 1300 1550 mm

Both:

• Saw reach 3.5 x 3.50 m up to 20 x 3.5 m
• With stationary bridge and moveable saw car or
• Moveable bridge over rails
• Saw car 3000 x 1500 mm
• 25 ton load capacity

The Helios Circular saw is for sawing square blocks and slate production out of sand stone, lime stone, marble en granite. With this machine you are able to produce automatically without operator.

• Blade diameter 600 1200 1600 2000 2500 2700 3000 3500mm
• Saw depth 210 450 630 800 1025 1125 1200 1450mm
• With stationary bridge and moveable saw car or
• Moveable bridge over rails
• Saw reach 1.2 x 2.0 m up to 5.5 x 7.0 m
• Saw car 5000 x 2500 mm
• 25 ton load capacity
• Suitable for fully automatic production

Diamond block saw for sand and lime stone, granite and marble.

• Number of wires 1
• Cutting depth 2100 mm
• Sawing reach 4000 x 2300 mm
• Hydraulic unit motor
• Number of blade strokes 160 /min
• Stationary bridge
• Saw table (car) 2300 x 2300 x 670 mm
• 30 ton load capacity

Frame saw machine for sawing slabs out of stone material.

• Number of wires max 30
• Cutting depth 1700 mm
• Sawing width 3000 mm
• Sawing length is unrestrained
• Min slap thickness is 20 mm
• Saw tensioned hydraulic
• Number of strokes approx 85/ min
• Processing speed 40 – 450 mm/ hr
• Saw table (car) 2900 x 1500 mm
• 20 ton load capacity